Tula State University, Tula, Russia
S. Ya. Khludov, Dr. Eng., Prof., Dept. of Mechanical Engineering Technologies, e-mail: hs_tula_politeh@mail.ru
O. V. Chechuga, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technologies
A. V. Yakushenkov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technologies

Shchekino Polytechnic College, Shchekino, Russia

D. S. Zyabreva, Head of the Academic Department, Research Teacher

It is shown that continuous continuous chips are the cause of unforced equipment stoppage and tool breakage when turning workpieces made of steel groups P and M according to the ISO classification. Continuous chips complicate their transportation and require additional costs during processing. A classification of methods for destroying a coil of continuous chips is given as processes of separation, crushing and breaking. It is established that the destruction of chips as a chip-breaking process is the result of an additional impact on the coil from the obstacles that it encounters on the path of movement after leaving the front surface of the tool. When turning, the obstacles on the path of the coil are the rear surface of the tool, the machined and machined surfaces of the workpiece and the cutting surface. The result of the chip-breaking process is the destruction of continuous chips into single-coil and multi-coil elements. It is proved that the destruction of a turn of chips into single-turn elements is always accompanied by the destruction into multi-turn elements. It is established that the process of chip breaking is carried out according to different schemes depending on the shape of the chip. The necessary conditions for the destruction of a turn of chips are substantiated and its sufficient condition is established. The criteria for the existence of the process of chip breaking are determined.

1. GOST 1050–2013. Metal products from nonalloyed structural quality and special steels. General specification. Introduced: 01.01.2015.
2. GOST 5632–2014. Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades. Introduced: 01.01.2015.
3. GOST 2590–2006. Round hot-rolled steel bars. Dimensions. Introduced: 01.07.2009.
4. Vasin S. A., Khludov S. Ya. Design of indexable inserts. Methodological principles. Moscow : Mashinostroenie, 2006. 352 p.
5. Zlotnikov E. G., Maksarov V. V. Modern technologies of processing and briquetting of metal chips in automated production. Zapiski Gornogo instituta. 2014. Vol. 209. pp. 37–41.
6. Khludov S. Ya., Markova E. V., Chechuga O. V., Chechuga A. O. Development of a methodology for ensuring stable chip crushing during cutting. III International Scientific and Educational Forum “Heilongjiang Priamurye”: proceedings of the International Scientific Conference, Russia, Birobidzhan, October 3, 2019. Birobidzhan : IC, Sholom Aleikhem Amur State University, 2019. pp. 735–742.
7. Vasin S. A., Ivanov V. V. Chip breaking during turning. Tula : Izdatelstvo TulGU, 2001. 151 p.
8. Bobrov V. F. Metal cutting theory fundamentals. Moscow : Mashinostroenie, 1975. 344 p.
9. Maksarov V. V., Olt Yu. Control of the chip breaking process by the method of plastic action on the workpiece surface being machined. Izvestiya vuzov. Mashinostroenie. 2008. No. 12. pp. 61–66.
10. Yaroslavtsev V. M. Cutting with advanced plastic deformation in metal chip recycling technologies. Nauka i obrazovanie: nauchnoe izdanie MGTU imeni N. E. Baumana. 2013. No. 7. pp. 79–90.
11. Khludov S. Ya., Chechuga O. V., Yakushenkov A. V. Change in the shape of a continuous chip curl during turning as a result of external influence. All-Russian scientific and technical conference “From tool quality to quality tools”: proceedings. September 19-20, 2023. Tula: Izdatelstvo TulGU, 2023. pp. 92–97.
12. Kufarev G. L. Theoretical foundations of chip shape control and creation of a range of cutters for turning plastic metals and alloys on CNC machines: inauguration of Dissertation … of Doctor of Engineering Sciences. Tomsk : TPI, 1985. 24 p.
13. Kufarev G. L. Physical model of continuous chip formation during continuous cutting. Vestnik mashinostroeniya. 1981. No. 10. pp. 54–58.
14. Wu H., To S. Serrated chip formation and their adiabatic analysis by using the constitutive model of titanium alloy in high speed cutting. J. Alloys Compd. 2015. Vol. 629. pp. 368–373.
15. Yılmaz B., Karabulut S., Güllü A. Performance analysis of new external chip breaker for efficient machining of inconel 718 and optimization of the cutting parameters. J. Manuf. Process. 2018. Vol. 32. pp. 553–563.
16. Pacella M. A. New low-feed chip breaking tool and its effect on chip morphology. Int. J. Adv. Manuf. Technol. 2019. Vol. 104. pp. 1145–1157.
17. Ee K. C., Balaji A. K., Jawahir I. S. Progressive tool-wear mechanisms and their effects on chip-curl/chip-form in machining with grooved tools: An extended application of the equivalent toolface (ET) model. Wear. 2003. Vol. 255. pp. 1404–1413.
18. Cascón I., Sarasua J. A., Elkaseer A. Tailored chip breaker development for polycrystalline diamond inserts: FEM-based design and validation. Appl. Sci. 2019. Vol. 9. 4117.
19. Lotfi M., Farid A. A., Soleimanimehr H. The effect of chip breaker geometry on chip shape, bending moment, and cutting Force: FE analysis and experimental study. Int. J. Adv. Manuf. Technol. 2015. Vol. 78. pp. 917–925.
20. Mikhaylov S. V., Evdokimov D. E. Evaluation of the probability of chip crushing during metal cutting. Students and young scientists of KSTU to production: proceedings of the 57^th Interuniversity Scientific and Technical Conference of Young Scientists and Students. Kostroma : Izdatelstvo KGTU, 2005. pp. 131–132.
21. Khludov S. Ya., Markova E. V., Zyabrev D. S. Study of destruction of continuous chip curl as a process of “breakage” during turning of materials of P and M groups according to ISO classification. Izvestiya Tulskogo gosudarstvennogo universiteta. Tekhnicheskie nauki. 2022. No. 3. pp. 564–569.
22. Mikhaylov S. V., Kovelenov N. Yu., Bolotskikh S. V. Features of design and selection of indexable inserts with a curved front surface. Metalloobrabotka: nauchno-proizvodstvenny zhurnal. 2017. No. 2 (98). pp. 4–10.