Journals →  Eurasian Mining →  2015 →  #2 →  Back

PHYSICS AND MECHANICS OF ROCKS
ArticleName Adaptation of the mechanized roof support to changeable rock pressure
DOI 10.17580/em.2015.02.03
ArticleAuthor Buevich V. V., Gabov V. V., Zadkov D. A., Vasileva P. A.
ArticleAuthorData

National Mineral Resources University (Mining University), Saint Petersburg, Russian Federation:

V. V. Buevich, Postgraduate Student, buevich.v@bk.ru

V. V. Gabov, Professor, gvv40@mail.ru

D. A. Zadkov, Associate Professor, dzadkov@yandex.ru

P. А. Vasileva, Associate Professor, polina_vasileva2013@mail.ru

Abstract

The article discusses the possibility of adapting sections of mechanized roof supports to the variable geological and mining factors dealing with flat seams of medium thickness in longwall complex-mechanized coal face. Adaptation is provided by the rock pressure regulation of the pressure change rate in the piston cavities of hydraulic legs with static work load on the roof support. The proposed technical solution allows to separate process regulation function of rock pressure in the roof settling process from the protection function of the shields to be overloaded. Rock pressure regulation is provided by continuous regulation of fluid flow from the piston cavity into the complex hydraulic system which eliminates the sharp pressure drop in the elements of the hydraulic system sections, dynamic loads on the roof support in the regulating process. It also partly transfers potential energy of roof rock settling in the hydraulic system of the complex. Nonimpulsive rock pressure regulation leads to intensity decrease of crack formation processes directly in roof and rock caving in longwall face, to volume reduction of dangerous works stowing cavities formed over roof support, stability increase of coal mining technological process and safety works in coal faces. In the case of sharp roof block collapse at the limited capacity of an adjustable throttle, the piston emphasis in the top part of the pressure amplifier is provided in the block design. In this case pressure increase in piston cavity of hydraulic legs causing relief valve actuation in the protection mode against overloads is possible.

keywords Underground mining, longwall face, regulation of rock pressure, shield, jacks, mechanical characteristics, the working resistance, pressure relief valve, the operating mode, energy recuperation
References

1. Korovkin Yu. A. Mekhanizirovannye krepi ochistnykh zaboev (Powered supports of breakage faces). Under the editorship of Yu. L. Khudin. Moscow : Nedra, 1990. 413 p.

2. Jacobi O. Praktika upravleniya gornym davleniem (Rock pressure control practice). Translated from German. Moscow : Nedra, 1987. 566 p.

3. Dokukin A. V., Korovkin Yu. A., Yakovlev N. I. Mekhanizirovannye krepi i ikh razvitie (Powered supports and their development). Moscow : Nedra, 1984. 288 p.

4. Klishin V. I. Adaptatsiya mekhanizirovannykh krepey k usloviyam dinamicheskogo nagruzheniya (Adaptation of mechanized supports to the dynamic loading conditions). Novsibirsk : Nauka, 2002. 199 p.

5. Buyalich G. D., Antonov Yu. A., Sheykin V. I. O napravlenii snizheniya napryazhenno-deformirovannogo sostoyaniya prizaboynoy zony ugolnogo plasta (About the way of decreasing of stress-strain state of well face of coal layer). Gornyy Informatsionno-Analiticheskiy Byulleten = Mining Informational-Analytical Byulletin. 2011. No. 12, Vol. 2. pp. 198-202.

6. Gorodilov N. N. Osobennosti rezhimov raboty mekhanizirovannoy krepi s uchetom veroyatnostnogo kharaktera vzaimodeystviya ee s trudnoobrushayusheysya krovley ugolnogo plasta (Peculiarities of operation modes of powered support taking into account the probabilistic nature of its interconnection with difficult-collapsible roof of coal layer). Gornyy Informatsionno-Analiticheskiy Byulleten = Mining Informational-Analytical Byulletin. 2012. No. 3. pp. 234-239.

7. S. S. Peng. Longwall Mining. 2nd edition. October 2006. pp. 621.

8. Cheng Jingyi, Wan Zhijun, Peng Syd S, Liu Sifei, Ji Yinlin. What can the changes in shield resistance tell us during the period of shearer’s cutting and neighboring shields’ advance? International Journal of Mining Science and Technology. 2015. Date Views. 15. 08. 2015. dx.doi.org/10.1016/j.ijmst.2015.03.006.

9. B. Ramesh Kumar, U. Siva Sankar. VNS Prasad. Selection of Powered Roof Supports – 2-Leg Shields vis-à-vis 4- Leg Chock Shields. International  Conference on Underground Space Technology. Bangalore, India, 17-19 January 2011. pp. 1-20.

10. Sorin Vatavu, Niculina Vatavu. Constructive and Calculus particularities for the hydraulic props of powered roof support. Annual of the University of Mining and Geology “St. Ivan Rilski”. Sofia, Bulgaria, 2006. Vol. 49, Part ІІІ, Mechanization, electrification and automation in mines. pp. 7-10.

11. Petr Novak, Jan Babjak. Roof support control in longwall technology. 4th Coal Operators Conference. University of Wollongong. The Australasian Institute of Mining and Metallurgy & Mine Managers Association of Australia, 2014. pp. 34-41.

12. V. V. Buevich, V. V. Gabov, O. V. Kabanov. Gidrophitsirovannaya krep s reguliruemym soprotivleniem i rekuperatsiey energii (Hydrophicated support with regulated resistance and energy recuperation). Patent RU2503816 C1. Applier: National Mineral Resources University. Published: January 10, 2014. Bulletin of Inventions No. 35. 

Language of full-text english
Full content Buy
Back