ArticleName | Electropulse technology of briquetting shavings and other scrap of ferrous metals |
ArticleAuthor | S. D. Samujlov |
ArticleAuthorData | A. F. Ioffe Physicotechnical institute of the Russian Academy of Sciences S. D. Samujlov |
Abstract | One of actual problems is rational use of a lightweight metal scrap that is important for their recycling. Fuller and rational use of a lightweight metal waste probably by means of an electrophysical electropulse method of briquetting in which as the technological tool the electric current of the big density is used. The method consists in pressing crushed metal scrap at rather small pressure (to 0,5 t/sm2 for highstrength alloys and porosity of briquettes on 50 %) and processing with use of short impulse of an electric current. Such processing allows to connect the pressed material in a firm briquette. |
References | 1. Frank Kreith, Handbook of Solid Waste Management, George Tchobanoglous, 2008, 950 p. |
Full content | Electropulse technology of briquetting shavings and other scrap of ferrous metals |