Journals →  Chernye Metally →  2025 →  #1

Chernye Metally



Preparation of Raw Materials
ArticleName Effect of die taper angles, binder amount and type on strength characteristics of extrusion briquettes
ArticleAuthors V. B. Kuskov, E. S. Iliin
ArticleAuthorsData

Empress Catherine II Saint Petersburg Mining University, Saint Petersburg, Russia

V. B. Kuskov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Kuskov_VB@pers.spmi.ru
E. S. Iliin, Postgraduate Student, Dept. of Mineral Processing, e-mail: s235069@stud.spmi.ru

ArticleName Determination of specific surface area of pore space of iron ore pellets
ArticleAuthors I. S. Bersenev, A. M. Bizhanov, E. R. Sabirov, N. A. Spirin
ArticleAuthorsData

Research and Development Company TOREX, Yekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B.N. Yeltsin, Yekaterinburg, Russia2
I. S. Bersenev, Cand. Eng., Head of the Research and Analysis Department1, Associate Prof.2, e-mail: i.bersenev@torex-npvp.ru


National University of Science and Technology MISIS, Moscow, Russia
A. M. Bizhanov, Cand. Eng., Leading Expert

 

Research and Development Company TOREX, Yekaterinburg, Russia
E. R. Sabirov, Engineer

 

Ural Federal University named after the first President of Russia B.N. Yeltsin, Yekaterinburg, Russia
N. A. Spirin, Dr. Eng., Prof., Head of the Dept. of Thermal Physics and Informatics in Metallurgy

Ironmaking
ArticleName Modernization of the drive of the hopper gate of the blast furnace autoclave for preparation of liquid glass
ArticleAuthors V. V. Grachev, I. V. Kotov, A. V. Nefedov, N. A. Chichenev
ArticleAuthorsData

Novotroitsk branch of NUST MISIS, Novotroitsk, Russia

V. V. Grachev, Student, Dept. of Metallurgical Technologies and Equipment, e-mail: nfmisis@yandex.ru
I. V. Kotov, Assistant, Dept. of Mathematics and Natural Science, e-mail: ivk92@yandex.ru
A. V. Nefedov, Cand. Ped., Associate Prof., Deputy Director of the Branch for UMR, Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: cosnovotr@rambler.ru

 

NUST MISIS, Moscow, Russia
N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru

Rolling
ArticleName Research and design of the process of asymmetric cold rolling of steel strips. Message 1
ArticleAuthors A. V. Kozhevnikov, D. L. Shalaevsky, I. A. Kozhevnikova
ArticleAuthorsData

Cherepovets State University, Cherepovets, Russia
A. V. Kozhevnikov, Dr. Eng., Associate Prof., Head of the Dept. of Electric Power and Electrical Engineering
D. L. Shalaevsky, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, e-mail: shal-dmitrij@yandex.ru
I. A. Kozhevnikova, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy, Mechanical Engineering and Technological Equipment

Tubemaking
ArticleName Modeling of the hexagonal tube profiling process
ArticleAuthors B. V. Barichko, K. Yu. Yakovleva
ArticleAuthorsData

TMK Research & Development Center, Chelyabinsk, Russia
B. V. Barichko, Cand. Eng., Leading Researcher, Drawing and Pressing Laboratory
K. Yu. Yakovleva, Cand. Eng., Head of Drawing and Pressing Laboratory, e-mail: yakovleva@rosniti.ru

ArticleName Evaluation of deformed, thermal and kinematic states and their influence on the microstructure of a stainless steel billet during three-high screw rolling
ArticleAuthors M. M. Skripalenko, B. A. Romantsev, M. N. Skripalenko, V. A. Vorotnikov
ArticleAuthorsData

NUST MISIS, Moscow, Russia

M. M. Skripalenko, Cand. Eng., Associate Prof., e-mail: mms@misis.ru
B. A. Romantsev, Dr. Eng., Prof., e-mail: boralr@yandex.ru
M. N. Skripalenko, Cand. Eng., Associate Prof., Scientific Project Expert, e-mail: tfsmn@yandex.ru
V. A. Vorotnikov, Leading Specialist in Technical Equipment, e-mail: vrtnkov@gmail.com

ArticleName Deformation of a billet during helical rolling under the effect of intra-center axial tension
ArticleAuthors Zh. Ya. Rotenberg, A. S. Budnikov, M. D. Dudyrev
ArticleAuthorsData

Mönchengladbach, Germany

Zh. Ya. Rotenberg, Cand. Eng., Independent Researcher, e-mail: zhozef.rotenberg@mail.ru

 

National University of Science and Technology MISIS, Moscow, Russia
A. S. Budnikov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: budnikov.as@misis.ru
M. D. Dudyrev, Postgraduate Student, Dept. of Metal Forming, e-mail: m153802@edu.misis.ru

ArticleName Analysis of causes of casing pipe coupling failure during oil well drilling and development of recommendations for its prevention
ArticleAuthors A. T. Mammadov, A. I. Babayev, M. Ch. Huseynov, B. B. Musurzayeva
ArticleAuthorsData

Azerbaijan Technical University, Baku, Azerbaijan

A. T. Mammadov, Dr. Eng., Prof., e-mail: ariff-1947@mail.ru
A. I. Babayev, Cand. Eng., Associate Prof., e-mail: aqil.babayev@aztu.edu.az
M. Ch. Huseynov, Cand. Eng., Associate Prof., e-mail: muxtar.53@mail.ru
B. B. Musurzayeva, Senior Lecturer, e-mail: musurzayeva71@mail.ru

Rolling and Metal Science
ArticleName Study of fine-grain structure formation during asymmetric hot rolling of low-carbon steels
ArticleAuthor D. O. Pustovoytov
ArticleAuthorData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

D. O. Pustovoytov, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, Senior Researcher, A. P. Zhilyaev Laboratory of Gradient Nanomaterials Mechanics1, e-mail: pustovoitov_den@mail.ru

Composite Materials
ArticleName Calculation of permissible heat flux for tungsten-steel (WSS) composite of energy-stressed element of thermonuclear reactor
ArticleAuthors N. S. Popov, A. N. Suchkov, M. Yu. Zharkov, V. O. Kirillova
ArticleAuthorsData

National Research Nuclear University MEPhI, Moscow, Russia

N. S. Popov, Engineer, e-mail: nspopov@mephi.ru
A. N. Suchkov, Cand. Eng., Associate Prof., Acting Deputy head of the Dept., e-mail: ansuchkov@mephi.ru

V. O. Kirillova, Engineer, e-mail: vok11012002@gmail.com

 

National Research Nuclear University MEPhI, Moscow, Russia1 ; N. A. Dollezhal Scientific Research and Design Institute of Energy Technologies (NIKIET), Moscow, Russia2

M. Yu. Zharkov, Engineer1, 2, e-mail: mg-dist@yandex.ru

Machine-building Technologies
ArticleName Analysis of variability of operating time between failures of milling cutters when cutting rolled products based on the cumulative approach to data processing
ArticleAuthors E. N. Malyshev, E. A. Loshkareva
ArticleAuthorsData

Bauman Moscow State Technical University, Moscow, Russia
E. N. Malyshev, Cand. Eng., Associate Prof., Head of Dept., e-mail: malen@bmstu.ru

 

Kaluga State University named after K. E. Tsiolkovski, Kaluga, Russia
E. A. Loshkareva, Cand. Eng., Associate Prof.

Powder Metallurgy
ArticleName Study of sintering process of SP40KhSMF powder steel containing iron stearate lubricantplasticizer in the initial batch
ArticleAuthors Zh. V. Eremeeva, Yu. S. Ter-Vaganyants
ArticleAuthorsData

National University of Science and Technology “MISIS”, Moscow, Russia

Zh. V. Eremeeva, Dr. Eng., Prof., Curator of the Dept. of Powder Metallurgy and Functional Coatings, e-mail: eremeeva-shanna@yandex.ru

 

Moscow Polytechnic University “Moscow Polytech”, Moscow, Russia
Yu. S. Ter-Vaganyants, Cand. Eng., Associate Prof., e-mail: juliatv1990@mail.ru

Ecology and Recycling
ArticleName Analysis of methods for gas cleaning from nanoparticles
ArticleAuthors I. V. Butorina, M. V. Butorina, S. V. Ganin
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia

I. V. Butorina, Dr. Eng., Prof., e-mail: butorina_irina@mail.ru

S. V. Ganin, Cand. Eng., Director of the Higher School of Physics and Technology of Materials, e-mail: ganin_sv@spbstu.ru

 

Baltic State Technical University “VOENMEKH” named after D. F. Ustinov, St. Petersburg, Russia
M. V. Butorina, Dr. Eng., Prof., e-mail: marina_butorina@inbox.ru

Economics and Finances
ArticleName Technological foundations of decarbonization in the supply chains of the Russian ferrous metallurgy
ArticleAuthor S. P. Petrov
ArticleAuthorData

Institute of Economics and Industrial Engineering, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia

S. P. Petrov, Cand. Econ., Head of the Dept. of Applied Regional Studies, e-mail: petrov.s.p@mail.ru

Journals →  Chernye Metally →  2025 →  #1