Chernye Metally
| Preparation of Raw Materials | |
| Название | Effect of die taper angles, binder amount and type on strength characteristics of extrusion briquettes |
| Авторы | V. B. Kuskov, E. S. Iliin |
| Информация об авторах | Empress Catherine II Saint Petersburg Mining University, Saint Petersburg, Russia V. B. Kuskov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Kuskov_VB@pers.spmi.ru |
| Название | Determination of specific surface area of pore space of iron ore pellets |
| Авторы | I. S. Bersenev, A. M. Bizhanov, E. R. Sabirov, N. A. Spirin |
| Информация об авторах | Research and Development Company TOREX, Yekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B.N. Yeltsin, Yekaterinburg, Russia2 National University of Science and Technology MISIS, Moscow, Russia
Research and Development Company TOREX, Yekaterinburg, Russia
Ural Federal University named after the first President of Russia B.N. Yeltsin, Yekaterinburg, Russia |
| Ironmaking | |
| Название | Modernization of the drive of the hopper gate of the blast furnace autoclave for preparation of liquid glass |
| Авторы | V. V. Grachev, I. V. Kotov, A. V. Nefedov, N. A. Chichenev |
| Информация об авторах | Novotroitsk branch of NUST MISIS, Novotroitsk, Russia V. V. Grachev, Student, Dept. of Metallurgical Technologies and Equipment, e-mail: nfmisis@yandex.ru
NUST MISIS, Moscow, Russia |
| Rolling | |
| Название | Research and design of the process of asymmetric cold rolling of steel strips. Message 1 |
| Авторы | A. V. Kozhevnikov, D. L. Shalaevsky, I. A. Kozhevnikova |
| Информация об авторах | Cherepovets State University, Cherepovets, Russia |
| Tubemaking | |
| Название | Modeling of the hexagonal tube profiling process |
| Авторы | B. V. Barichko, K. Yu. Yakovleva |
| Информация об авторах | TMK Research & Development Center, Chelyabinsk, Russia |
| Название | Evaluation of deformed, thermal and kinematic states and their influence on the microstructure of a stainless steel billet during three-high screw rolling |
| Авторы | M. M. Skripalenko, B. A. Romantsev, M. N. Skripalenko, V. A. Vorotnikov |
| Информация об авторах | NUST MISIS, Moscow, Russia M. M. Skripalenko, Cand. Eng., Associate Prof., e-mail: mms@misis.ru |
| Название | Deformation of a billet during helical rolling under the effect of intra-center axial tension |
| Авторы | Zh. Ya. Rotenberg, A. S. Budnikov, M. D. Dudyrev |
| Информация об авторах | Mönchengladbach, Germany Zh. Ya. Rotenberg, Cand. Eng., Independent Researcher, e-mail: zhozef.rotenberg@mail.ru
National University of Science and Technology MISIS, Moscow, Russia |
| Название | Analysis of causes of casing pipe coupling failure during oil well drilling and development of recommendations for its prevention |
| Авторы | A. T. Mammadov, A. I. Babayev, M. Ch. Huseynov, B. B. Musurzayeva |
| Информация об авторах | Azerbaijan Technical University, Baku, Azerbaijan A. T. Mammadov, Dr. Eng., Prof., e-mail: ariff-1947@mail.ru |
| Rolling and Metal Science | |
| Название | Study of fine-grain structure formation during asymmetric hot rolling of low-carbon steels |
| Автор | D. O. Pustovoytov |
| Информация об авторе | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia D. O. Pustovoytov, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, Senior Researcher, A. P. Zhilyaev Laboratory of Gradient Nanomaterials Mechanics1, e-mail: pustovoitov_den@mail.ru |
| Composite Materials | |
| Название | Calculation of permissible heat flux for tungsten-steel (WSS) composite of energy-stressed element of thermonuclear reactor |
| Авторы | N. S. Popov, A. N. Suchkov, M. Yu. Zharkov, V. O. Kirillova |
| Информация об авторах | National Research Nuclear University MEPhI, Moscow, Russia N. S. Popov, Engineer, e-mail: nspopov@mephi.ru V. O. Kirillova, Engineer, e-mail: vok11012002@gmail.com
National Research Nuclear University MEPhI, Moscow, Russia1 ; N. A. Dollezhal Scientific Research and Design Institute of Energy Technologies (NIKIET), Moscow, Russia2 M. Yu. Zharkov, Engineer1, 2, e-mail: mg-dist@yandex.ru |
| Machine-building Technologies | |
| Название | Analysis of variability of operating time between failures of milling cutters when cutting rolled products based on the cumulative approach to data processing |
| Авторы | E. N. Malyshev, E. A. Loshkareva |
| Информация об авторах | Bauman Moscow State Technical University, Moscow, Russia
Kaluga State University named after K. E. Tsiolkovski, Kaluga, Russia |
| Powder Metallurgy | |
| Название | Study of sintering process of SP40KhSMF powder steel containing iron stearate lubricantplasticizer in the initial batch |
| Авторы | Zh. V. Eremeeva, Yu. S. Ter-Vaganyants |
| Информация об авторах | National University of Science and Technology “MISIS”, Moscow, Russia Zh. V. Eremeeva, Dr. Eng., Prof., Curator of the Dept. of Powder Metallurgy and Functional Coatings, e-mail: eremeeva-shanna@yandex.ru
Moscow Polytechnic University “Moscow Polytech”, Moscow, Russia |
| Ecology and Recycling | |
| Название | Analysis of methods for gas cleaning from nanoparticles |
| Авторы | I. V. Butorina, M. V. Butorina, S. V. Ganin |
| Информация об авторах | Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia I. V. Butorina, Dr. Eng., Prof., e-mail: butorina_irina@mail.ru S. V. Ganin, Cand. Eng., Director of the Higher School of Physics and Technology of Materials, e-mail: ganin_sv@spbstu.ru
Baltic State Technical University “VOENMEKH” named after D. F. Ustinov, St. Petersburg, Russia |
| Economics and Finances | |
| Название | Technological foundations of decarbonization in the supply chains of the Russian ferrous metallurgy |
| Автор | S. P. Petrov |
| Информация об авторе | Institute of Economics and Industrial Engineering, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia S. P. Petrov, Cand. Econ., Head of the Dept. of Applied Regional Studies, e-mail: petrov.s.p@mail.ru |
