Journals →  CIS Iron and Steel Review →  2018 →  #2

CIS Iron and Steel Review



Hydrometallurgy
ArticleName Design of a hydrometallurgical complex for processing of complex low-grade manganese ores
ArticleAuthors D. Yu. Zhukov, Yu. M. Averina, V. V. Menshikov
ArticleAuthorsData

D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia):

D. Yu. Zhukov, Dr. Eng., Adviser to the Rector,
Yu. M. Averina, Dr. Eng., Associate Professor, Dept. of Innovative Materials and Corrosion Protection, e-mail: averinajm@mail.ru
V. V. Menshikov, Dr. Eng., Professor, Dept. of Innovative Materials and Corrosion Protection

Ironmaking
ArticleName Blast furnace performance improved through optimal radial distribution of materials at the top while changing the charging pattern
ArticleAuthors S. K. Sibagatullin, A. S. Kharchenko, G. Yu. Savchenko, V. A. Beginyuk
ArticleAuthorsData

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Technologies
A. S. Kharchenko, Cand. Eng., Assocoate Prof., Head of Dept. of Metallurgy and Chemical Technologies
G. Yu. Savchenko, Post-graduate, Dept. of Metallurgy and Chemical Technologies

 

Magnitogorsk Iron and Steel Works PJSC (MMK) (Magnitogorsk, Russia):

V. A. Beginyuk, Head Specialist of the Technological Group, Blast Furnace Shop

Steelmaking
ArticleName Iron oxidation state analysis in oxide-fluoride slags
ArticleAuthors L. Ya. Levkov, D. A. Pankratov
ArticleAuthorsData

JSC «RPA «CNIITMASH» (Moscow, Russia):

L. Ya. Levkov, Dr. Eng., Head of the Special Electrometallurgy Laboratory, e-mail: LYaLevkov@cniitmash.com, 6758745@mail.ru

 

Lomonosov Moscow State University (Moscow, Russia):
D. А. Pankratov, Cand. Chem., Leading Scientific Researcher, Chemical Dept., e-mail: pankratov@radio.chem.msu.ru

Rolling and Metal Forming
ArticleName Further developments in simulation of metal forming processes
ArticleAuthors M. I. Rumyantsev, O. N. Tulupov
ArticleAuthorsData

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

M. I. Rumyantsev, Cand. Eng., Prof., Dept. of Material Processing, e-mail: mikhail.rumyantsev54@bk.ru
O. N. Tulupov, Dr. Eng., Prof., Vice Rector for Research and Innovation, e-mail: o.tulupov@mail.ru

ArticleName Study the influence of anisotropy of the drawing cylindrical part
ArticleAuthors V. A. Demin, S. N. Larin, R. V. Riskin, A. A. Rizkova
ArticleAuthorsData

Bauman State Technical University (Moscow, Russia):

V. A. Demin, Dr. Eng., Prof., e-mail: va_demin@bk.ru

A. A. Rizkova, Post-graduate, Mechanical Engineer, MT6 Department

 

Tula State University (Tula, Russia):
S. N. Larin, Dr. Eng., Prof., Deputy Director on Research and Development, Polytechnic Institute, e-mail: mpf-tula@rambler.ru

 

3 Technical University of Munich (Munich, Germany):
R. V. Riskin, Master student

Carbon Materials
ArticleName Graphite as a prospective material for metallurgical application
ArticleAuthors V. N. Amelchenko, I. E. Illarionov, T. R. Gilmanshina, V. A. Borisyuk
ArticleAuthorsData

“Krasnoyarskgrafit” JSC (Krasnoyarsk, Russia):

V. N. Amelchenko, General Director, e-mail: krsgrafit@yandex.ru

 

Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof., Head of the Chair “Material Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru

 

“Siberian Federal University (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Professor, e-mail: gtr1977@mail.ru
V. A. Borisyuk, Post-Graduate, e-mail: kiro.30stm@mail.ru

Metal Science and Metallography
ArticleName Assessment and interpretation of nonmetallic inclusions in steel
ArticleAuthors A. A. Kazakov, A. I. Zhitenev
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., e-mail: kazakov@thixomet.ru
A. I. Zhitenev, Engineer

ArticleName Evolution of cementite in pearlite carbon steel wire at combined deformational processing
ArticleAuthors M. A. Polyakova, K. Narasimhan, M. J. N. V. Prasad, Yu. Yu. Efimova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing, e-mail: m.polyakova@magtu.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Material Processing, e-mail: yu.efimova@magtu.ru

 

Indian Institute of Technology Bombay (Mumbai, India):

K. Narasimhan, Dr. Eng. Department of Metallurgical Engineering and Materials Science, e-mail: nara@iitb.ac.in
M. J. N. V. Prasad, Dr. Eng. Department of Metallurgical Engineering and Materials Science

ArticleName Understanding the effect of deoxidation regime on the formation and arrangement of sulphide inclusions and on mechanical properties in steel
ArticleAuthors S. B. Gamanyuk, N. A. Zyuban, D. V. Rutskii, G. V. Babin
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

S. B. Gamanyuk, Cand. Eng., Associate Professor, e-mail: gamanuk@mail.ru
N. A. Zyuban, Dr. Eng., Professor, Head of the Chair “Technology of Materials”, e-mail: tecmat@vstu.ru
D. V. Rutskii, Cand. Eng., Associate Professor, e-mail: tecmat@vstu.ru
G. V. Babin, Post-Graduate

ArticleName Assessment of central heterogeneity in slab to forecast centerline segregation in plate steel
ArticleAuthors A. A. Kazakov, E. I. Kazakova, A. Kur
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., e-mail: kazakov@thixomet.ru
E. I. Kazakova, Leading Engineer
A. A. Kur, Cand. Eng.

ArticleName The study of the effect of chromium boron (CrB2) hardening additive on the developed PG-Zh40 surfacing powder
ArticleAuthors V. G. Mironov, G. T. Shilov, Zh. B. Ilmaliyev, A. A. Bekisheva
ArticleAuthorsData

Kazakh British Technical University, «KBTU METALLUM» LLP (Almaty, Kazakhstan):

V. G. Mironov, Cand. Eng., Head of the Project “TOO KBTU SPLAV”,
G. T. Shilov, Senior Researcher, Mechanical Engineer
A. A. Bekisheva, Doctoral Candidate, e-mail: ardabekovna@mail.ru

 

JSC «Institute of Metallurgy and Ore Beneficiation» (Almaty, Kazakhstan):

Zh. B. Ilmaliyev, Head of the Staff

 

I. K. Beysembetov (Satbayev University, Kazakhstan) and B. K. Kenzhaliev (Institute of Metallurgy and Ore Beneficiation) were also the participants in this work.

Coating
ArticleName Protective coatings produced by electro-spark deposition with TiCNiCr–(Eu2O3) electrodes
ArticleAuthors F. V. Kiryukhantsev-Korneev, A. D. Sytchenko, A. E. Kudryashov, E. A. Levashov
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

Ph. V. Kiryukhantsev-Korneev, Cand. Eng., Associate Prof., Department of Powder Metallurgy and Functional Coatings; Leading Researcher, Scientific and Educational Center SHS MISiS-ISMAN, e-mail: kiruhancev-korneev@yandex.ru
A. D. Sytchenko, Laboratory Assistant, Scientific and Educational Center SHS MISiS-ISMAN
A. E. Kudryashov, Cand. Eng., Leading Researcher, Scientific and Training Center SHS MISiS-ISMAN
E. A. Levashov, Dr. Eng., Prof., Head of the Department of Powder Metallurgy and Functional Coatings; Director, Scientific and Educational Center SHS MISiS-ISMAN

Casting and Foundry
ArticleName Understanding the effect of structural defects in graphite on the properties of foundry coatings
ArticleAuthors I. E. Illarionov, T. R. Gilmanshina, A. A. Kovaleva, N. A. Bratukhina
ArticleAuthorsData

Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof., Head of the Chair “Material Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru

 

Siberian Federal University (Krasnoyarsk, Russia):

T. R. Gilmanshina, Cand. Eng., Associate Professor, e-mail: gtr1977@mail.ru
A. A. Kovaleva, Cand. Eng., Associate Professor
N. A. Bratukhina, Associate Professor

Metal Working and Engineering Technologies
ArticleName How production regimes can impact the quality of GAZELLE NEXT ball joints
ArticleAuthors I. A. Mikhailovsky, I. Yu. Mezin, D. A. Pesterev
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

I. Yu. Mezin, Dr. Eng., Prof., Head the Chair of Automobile Technology, Certification and Service
I. A. Mikhailovsky, Dr. Eng., Prof., the Chair of Automobile Technology, Certification and Service


“BelMag” Scientific and Production Corporation (Magnitogorsk, Russia):

D. A. Pesterev, Leading Product Design Engineer, Design Engineering Dept., e-mail: pesterev@belmag.ru

Testing of Materials
ArticleName Control and experimental data processing in torsion testing with variable acceleration
ArticleAuthors M. V. Erpalov, D. A. Pavlov
ArticleAuthorsData

Ural Federal University (Ekaterinburg, Russia):

M. V. Erpalov, Cand. Eng., Assocoate Prof., Chair “Metal Forming”, e-mail: m.v.erpalov@urfu.ru
D. A. Pavlov, Cand. Eng., Associate Prof., Chair “Metal Forming”, e-mail: d.a.pavlov@urfu.ru

Journals →  CIS Iron and Steel Review →  2018 →  #2